Pre-Recording Checklist for 360 Camera Scans #
This checklist applies to both mobile mapping (MMS) and SLAM scans that use the GoPro MAX 2 360 camera. It covers the camera only. Complete it together with the Pre-Recording Checklist for the type of scan being performed (RESEPI SOP for Capturing MMS Scans or RESEPI SOP for Capturing SLAM Scans), which covers the RESEPI payload itself.
☐ Complete the Payload Checklist
- MMS scans: complete the MMS Pre-Recording Checklist.
- SLAM scans: complete the SLAM Pre-Recording Checklist.
☐ Mount the 360 Camera
- Install the GoPro MAX 2 on the mobile mount (MMS) or the backpack/handheld mount (SLAM) as described in the 360 Camera Mounting for MMS or 360 Camera Mounting for SLAM guide.
- Confirm the supplied Inertial Labs SD card is inserted in the camera.
- Confirm the camera is secure and the lens is clean and unobstructed.
☐ Battery and Storage
- Confirm the camera battery is fully charged.
- Confirm the SD card has enough free space for the entire recording.
☐ Camera Settings
Set the following on the camera touchscreen:
- Camera Mode: 360. The camera saves a
.360file. - Orientation: All.
- Profile: Standard.
- Resolution: 5.6K.
- Frame Rate: 30 fps.
- QuikCapture: Off.
- Scheduled Capture: Off.
- Duration: Off.
- Timer: Off.
- GPS: On.
- Do not change camera settings between scans of the same project.
☐ GPS Lock
- Confirm the GPS position icon at the top left of the camera touchscreen is blue, which shows the camera has a GPS fix.
- Wait for the GPS fix before recording. PCMasterPro uses the camera GPS time to help match the camera clock to the scanner clock.
☐ Camera Date and Time
- Confirm the camera date and time are correct.
☐ Boresight Calibration on the Payload
- In the payload web-GUI, go to Settings > Camera and confirm there is an entry for the mount being used:
- gopro-mms for MMS scans
- gopro-slam for SLAM scans
- If it is missing or needs updating, load it with “Read from PCMasterPro .pcpp File”. The calibration stays on the payload until it is overwritten by another calibration.
☐ Recording Order
- Start the 360 camera recording before starting the RESEPI recording, and stop it only after the RESEPI recording has stopped.
- Start and stop the RESEPI recording as described in the MMS or SLAM Mission Step-by-Step.
☐ Keep the Lower Image Clear
- Keep the operator’s body out of the lower part of the image where possible.
☐ Final Check
- Camera mounted securely with a clean lens.
- GPS icon blue.
- Camera settings confirmed.